| Xu Fengyu (徐丰羽),Yang Zhong,Jiang Guoping.[J].高技术通讯(英文),2017,23(3):279~285 |
|
| An analyzing and experimental method based on the resultant motion signals for SCARA manipulator joints |
| |
| DOI：10.3772/j.issn.1006-6748.2017.03.008 |
| 中文关键词: |
| 英文关键词: SCARA robot, motion signal, Jacobian matrix |
| 基金项目: |
| Author Name | Affiliation | | Xu Fengyu (徐丰羽) | | | Yang Zhong | | | Jiang Guoping | |
|
| Hits: 1160 |
| Download times: 1039 |
| 中文摘要: |
| |
| 英文摘要: |
| Acceleration reflects vibration of a robot, and the vibration signal can reflect the operation state of the robot. Generally, detection of robot mechanical arm failure requires installing sensors on each joint. This study proposes a method to diagnose the fault by single acceleration sensor only, which is installed at the end of the robot. The operation state of the robot is evaluated by analyzing vibration characteristics of its acceleration. First, a data acquisition function of a programmable multi-axis controller is applied to extract practical motion signals of the robot joints during operation, and practical motion signals are analyzed. Second, synthetic methods to determine acceleration of the end joints of SCARA robots in a Cartesian space is used based on the theory of the Jacobian matrix and the frequency domain of final acceleration is investigated. The relationship between end- and joint-vibration frequencies under given speeds is determined. Then, the method is verified by comparing characteristic frequencies of joint acceleration and synthetic acceleration in Cartesian coordinate system at different speeds. Finally, some faults can be diagnosed by comparing the acceleration vibration frequency extracted by a single acceleration sensor installed at the end of robot with the normal running state. Thus, this method can be used to monitor the signal variation of each joint without installing sensors on each robot joint. |
|
View Full Text
View/Add Comment Download reader |
| Close |
|
|
|
