文章摘要
罗显志,王垚,蔚保国.非合作导航信号盲检测与参数盲估计[J].高技术通讯(中文),2011,21(12):1258~1263
非合作导航信号盲检测与参数盲估计
Blind detection of non cooperative navigation signals and blind estimation of the signals’ parameters
  修订日期:2010-04-16
DOI:
中文关键词: 信号监测, 参数估计, 循环平稳信号, 自相关, 滑动相关
英文关键词: signal monitoring, parameter estimation, cyclostationary signal, autocorrelation, slippage correlation
基金项目:863计划(2007AA12Z330, 2008AA12Z302, 2009AA12Z328)资助项目
作者单位
罗显志 中国电子科技集团公司第54研究所石家庄;河北省卫星导航技术与装备工程技术研究中心石家庄 
王垚 中国电子科技集团公司第54研究所石家庄;河北省卫星导航技术与装备工程技术研究中心石家庄 
蔚保国 中国电子科技集团公司第54研究所石家庄;河北省卫星导航技术与装备工程技术研究中心石家庄 
摘要点击次数: 3005
全文下载次数: 2266
中文摘要:
      为了实现非合作导航信号的监测,研究了非合作导航信号的多普勒频率、伪码速率、伪码周期、信号功率、码序列等参数的估计。在描述全球卫星导航系统(GNSS)信号模型和GNSS监测系统体系结构的基础上,给出了GNSS信号检测与参数估计流程,提出了一套非合作导航信号盲检测与参数盲估计方法,即利用导航信号循环平稳特性估计信号频率、码速率和信号功率,再根据周期信号自相关方法估计伪码周期,最后使用滑动相关方法和数据累加方法估计信号码序列。仿真结果验证了提出方法的正确性
英文摘要:
      To monitor non cooperative navigation signals, the paper studies the estimation of the signals’ parameters like Doppler frequency, symbol rate, code period, power and code structure. Based on the description of the global navigation satellite system (GNSS) model and GNSS monitoring structure, the method for blind detection of non cooperative navigation signals and blind estimation of the above mentioned parameters is proposed as below. The cyclostationary characteristic of navigation signals is used to estimate the signal power, the symbol rate and the Doppler frequency. The code period is measured based on the autocorrelation function of periodic signals. The slippage correlation method and the data accumulation method are used to decode the code structure. A simulation example illustrates the effectiveness of the approach
查看全文   查看/发表评论  下载PDF阅读器
关闭

分享按钮